Author: Kazimi, R.
Paper Title Page
FRXD6 Bunch Length Measurements at the CEBAF Injector at 130 kV 917
  • S. Pokharel, G.A. Krafft
    ODU, Norfolk, Virginia, USA
  • M.W. Bruker, J.M. Grames, A.S. Hofler, R. Kazimi, G.A. Krafft, S. Zhang
    JLab, Newport News, Virginia, USA
  Funding: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177.
In this work, we investigated the evolution in bunch length of beams through the CEBAF injector for low to high charge per bunch. Using the General Particle Tracer (GPT), we have simulated the beams through the beamline of the CEBAF injector and analyzed the beam to get the bunch lengths at the location of chopper. We performed these simulations with the existing injector using a 130 kV gun voltage. Finally, we describe measurements to validate these simulations. The measurements have been done using chopper scanning technique for two injector laser drive frequency modes: one with 500 MHz, and another with 250 MHz.
slides icon Slides FRXD6 [0.800 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-FRXD6  
About • Received ※ 02 August 2022 — Revised ※ 07 August 2022 — Accepted ※ 10 August 2022 — Issue date ※ 01 September 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)