Author: Chen, Y.C.
Paper Title Page
WEPA44 Compact Inter-Undulator Diagnostic Assembly for TESSA-515 732
 
  • T.J. Hodgetts, R.B. Agustsson, Y.C. Chen, A.Y. Murokh, M. Ruelas
    RadiaBeam, Santa Monica, California, USA
  • P.E. Denham, A.C. Fisher, J. Jin, P. Musumeci, Y. Park
    UCLA, Los Angeles, USA
 
  Funding: DOE grant DE-SC0009914, DE-SC0018559, and DE-SC0017102.
Beamline space is a very expensive and highly sought-after commodity, which makes the creation of compact integrated optics and diagnostics extremely valuable. The FAST- GREENS experimental program aims at demonstrating 10 % extraction efficiency from a relativistic electron beam using four helical undulators operating in the high gain TESSA regime. The inter-undulator gap needs to be as short as possible (17 cm in the current plans) to maximize the output power. Within this short distance, we needed to fit two focusing quadrupoles, a variable strength phase shifter, a transverse profile monitor consisting of a YAG-OTR combination for co-aligning the electron beam and laser, and an ion pump. By making the quadrupoles tunable with a variable gradient, in combination with vertical displacement, we can meet the optics requirements of matching the beam transversely to the natural focusing of the undulators. The two quadrupoles in conjunction with the electromagnetic dipole also serve as a phase shifter to realign the radiation and the bunching before each undulator section. This paper will discuss the mechanical design of this inter-undulator break section and its components.
 
poster icon Poster WEPA44 [0.752 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA44  
About • Received ※ 27 July 2022 — Revised ※ 03 August 2022 — Accepted ※ 08 August 2022 — Issue date ※ 11 August 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPA48 Electromagnetic Design of a Compact RF Chopper for Heavy-Ion Beam Separation at FRIB 738
 
  • A.C. Araujo Martinez, R.B. Agustsson, Y.C. Chen, S.V. Kutsaev
    RadiaBeam, Santa Monica, California, USA
  • A.S. Plastun, X. Rao
    FRIB, East Lansing, Michigan, USA
 
  Funding: This work was supported by the U.S. Department of Energy, Office of High Energy Physics, under SBIR grant DE- SC0020671.
Rare isotope beams are produced at FRIB via fragmentation of a primary heavy ion beam in a thin target. The isotope beam of interest is contaminated with other fragments, which must be filtered out to ensure the delivery of rare isotopes with desired rates and purities. One of the stages of fragment separation uses an RF deflecting cavity to provide time-of-flight separation. However, to avoid neighboring bunches overlapping with each other and with the contaminants, it is necessary to increase the inter-bunch distance by a factor of four, corresponding to a 20.125 MHz rate. To solve this problem, we have developed an RF chopper system for the 500 keV/u primary heavy-ion beams. The system consists of a deflecting quarter wave resonator (QWR) cavity operating at 60.375 MHz, two dipole steering magnets, and a beam dump. In this paper, we present and discuss the optimization of the electromagnetic design of the QWR cavity and magnets, as well as some aspects, related to beam dynamics and conceptual engineering design.
 
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA48  
About • Received ※ 02 August 2022 — Revised ※ 05 August 2022 — Accepted ※ 06 August 2022 — Issue date ※ 08 September 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)