Paper | Title | Page |
---|---|---|
TUXD2 |
An E-Beam Irradiation Beamline at Jefferson Lab for 1,4-Dioxane and Per- and Polyfluoroalkyl Substances Remediation in Wastewater | |
|
||
Funding: Jefferson Lab Laboratory Directed Research and Development Program. The Upgraded Injector Test Facility (UITF) at Jefferson Lab, providing a beam energy up to 10 MeV, is suitable for wastewater remediation research. To investigate the degradation of 1,4-dioxane and per- and polyfluoroalkyl substances (PFAS), widespread in wastewater and potential to be regulated in near future [1], a beamline for electron-beam irradiation has been designed, installed and successfully commissioned at the UITF. A solenoid with a peak axial magnetic field of up to 0.28 T and a raster were used to obtain a Gaussian beam profile with a transverse standard deviation of ~15 mm. It was applied to irradiate 1,4-dioxane sample filled in the target cell that was designed to let the entire sample receive significant irradiation doses. The dose distribution and absorbed dose, few studied in the existing publications, are necessary measures for the degradation mechanism investigation and have been innovatively achieved in this work using simulations, which were calibrated with opti-chromic dosimeter rods directly exposed to the electron beam. This approach provides an important way for investigating the environmental remediation impact of electron-beam irradiation. [1] U.S. EPA. Announcement of preliminary regulatory determinations for contaminants on the fourth drinking water contaminant candidate list. Federal register, 85(47):14098 - 14142, 2020.2. |
||
Slides TUXD2 [2.988 MB] | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPA52 | Demonstration of Twice-Reduced Lorentz-Force Detuning in SRF Cavity by Copper Cold Spraying | 749 |
|
||
Funding: The project is funded by DOE SBIR # DE-SC0019589 Superconducting RF (SRF) cavities usually are made from thin-walled high RRR Niobium and are susceptible to Lorentz Force Detuning (LFD) ’ cavity deformation phenomena by RF fields. In this paper, we present high gradient cryogenic results of an SRF cavity with two times reduced LFD achieved by copper cold spray reinforcement without sacrificing cavity flexibility for tuning. Finite-element model was developed first to find the best geometry for LFD reduction, which incorporated coupled RF, structural and thermal modules, and is also presented. |
||
DOI • | reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA52 | |
About • | Received ※ 27 July 2022 — Revised ※ 03 August 2022 — Accepted ※ 09 August 2022 — Issue date ※ 16 August 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |