NAPAC2022 - List of Authors (Gassner, D.M.)

Paper	Title	Page
WEPA85	Localized Beam Induced Heating Analysis of the EIC Vacuum Chamber Components	833
	M.P. Sangroula, D.M. Gassner, C.J. Liaw, C. Liu, P. Thieberger BNL, Upton, New York, USA J.R. Bellon, A. Blednykh, C. Hetzel, S. Verdú-Andrés Brookhaven National Laboratory (BNL), Electron-Ion Collider, Upton, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy The Electron-Ion Collider (EIC), to be built at Brookhaven National Laboratory (BNL), is designed to provide a high electron-proton luminosity of 10³⁴ cm^-2 s^-1. One of the challenging tasks for the Electron Storage Ring (ESR) is to operate at an average beam current of 2.5 A within 1160 bunches with a ~ 7 mm bunch length. The Hadron Storage Ring (HSR) will accumulate an average current of 0.69 A within 290 bunches with a 60 mm bunch length. Both rings require the impedance budget simulations. The intense e-beam in the ESR can lead to the overheating of vacuum chamber components due to localized metallic losses. This paper focuses on the beam-induced heating analysis of the ESR vacuum components including bellows, gate-valve, and BPM. To perform thermal analysis, the resistive loss on individual components is calculated with CST and then fed to ANSYS to determine the temperature distribution on the vacuum components. Preliminary results suggest that active water cooling will be required for most of the ESR vacuum components. Similar approach is applied to the HSR vacuum components. The thermal analysis of the HSR stripline injection kicker is presented.
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA85
About •	Received ※ 03 August 2022 — Revised ※ 08 August 2022 — Accepted ※ 10 August 2022 — Issue date ※ 10 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THZE2	Developing Control System Specifications and Requirements for Electron Ion Collider	901
	A. Blednykh, D.M. Gassner Brookhaven National Laboratory (BNL), Electron-Ion Collider, Upton, New York, USA E.C. Aschenauer, P. Baxevanis, M. Blaskiewicz, K.A. Drees, T. Hayes, J.P. Jamilkowski, G.J. Marr, S. Nemesure, V. Schoefer, T.C. Shrey, K.S. Smith, F.J. Willeke BNL, Upton, New York, USA L.R. Dalesio EPIC Consulting, Medford, New York, USA
	An Accelerator Research facility is a unique science and engineering challenge in that the requirements for developing a robust, optimized science facility are limited by engineering and cost limitations. Each facility is planned to achieve some science goal within a given schedule and budget and is then expected to operate for three decades. In three decades, the mechanical systems and the industrial IO to control them is not likely to change. In that same time, electronics will go through some 4 generations of change. The software that integrates the systems and provides tools for operations, automation, data analysis and machine studies will have many new standards. To help understand the process of designing and planning such a facility, we explain the specifications and requirements for the Electron Ion Collider (EIC) from both a physics and engineering perspective.
	Slides THZE2 [5.375 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-THZE2
About •	Received ※ 04 August 2022 — Revised ※ 10 August 2022 — Accepted ※ 11 August 2022 — Issue date ※ 13 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Localized Beam Induced Heating Analysis of the EIC Vacuum Chamber Components

833

M.P. Sangroula, D.M. Gassner, C.J. Liaw, C. Liu, P. Thieberger
BNL, Upton, New York, USA
J.R. Bellon, A. Blednykh, C. Hetzel, S. Verdú-Andrés
Brookhaven National Laboratory (BNL), Electron-Ion Collider, Upton, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy
The Electron-Ion Collider (EIC), to be built at Brookhaven National Laboratory (BNL), is designed to provide a high electron-proton luminosity of 10³⁴ cm^-2 s^-1. One of the challenging tasks for the Electron Storage Ring (ESR) is to operate at an average beam current of 2.5 A within 1160 bunches with a ~ 7 mm bunch length. The Hadron Storage Ring (HSR) will accumulate an average current of 0.69 A within 290 bunches with a 60 mm bunch length. Both rings require the impedance budget simulations. The intense e-beam in the ESR can lead to the overheating of vacuum chamber components due to localized metallic losses. This paper focuses on the beam-induced heating analysis of the ESR vacuum components including bellows, gate-valve, and BPM. To perform thermal analysis, the resistive loss on individual components is calculated with CST and then fed to ANSYS to determine the temperature distribution on the vacuum components. Preliminary results suggest that active water cooling will be required for most of the ESR vacuum components. Similar approach is applied to the HSR vacuum components. The thermal analysis of the HSR stripline injection kicker is presented.

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA85

About •

Received ※ 03 August 2022 — Revised ※ 08 August 2022 — Accepted ※ 10 August 2022 — Issue date ※ 10 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THZE2

Developing Control System Specifications and Requirements for Electron Ion Collider

901

A. Blednykh, D.M. Gassner
Brookhaven National Laboratory (BNL), Electron-Ion Collider, Upton, New York, USA
E.C. Aschenauer, P. Baxevanis, M. Blaskiewicz, K.A. Drees, T. Hayes, J.P. Jamilkowski, G.J. Marr, S. Nemesure, V. Schoefer, T.C. Shrey, K.S. Smith, F.J. Willeke
BNL, Upton, New York, USA
L.R. Dalesio
EPIC Consulting, Medford, New York, USA

An Accelerator Research facility is a unique science and engineering challenge in that the requirements for developing a robust, optimized science facility are limited by engineering and cost limitations. Each facility is planned to achieve some science goal within a given schedule and budget and is then expected to operate for three decades. In three decades, the mechanical systems and the industrial IO to control them is not likely to change. In that same time, electronics will go through some 4 generations of change. The software that integrates the systems and provides tools for operations, automation, data analysis and machine studies will have many new standards. To help understand the process of designing and planning such a facility, we explain the specifications and requirements for the Electron Ion Collider (EIC) from both a physics and engineering perspective.

Slides THZE2 [5.375 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-THZE2

About •

Received ※ 04 August 2022 — Revised ※ 10 August 2022 — Accepted ※ 11 August 2022 — Issue date ※ 13 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)