NAPAC2022 - List of Authors (Pozdeyev, E.)

Paper	Title	Page
MOPA36	Optimization of Superconducting Linac for Proton Improvement Plan-II (PIP-II)	132
	A. Pathak, E. Pozdeyev Fermilab, Batavia, Illinois, USA
	PIP-II is an essential upgrade of the Fermilab complex that will enable the world’s most intense high-energy beam of neutrinos for the international Deep Underground Neutrino Experiment at LBNF and support a broad physics program at Fermilab. Ultimately, the PIP-II superconducting linac will be capable of accelerating the H⁻ CW beam to 800 MeV with an average power of 1.6 MW. To operate the linac with such high power, beam losses and beam emittance growth must be tightly controlled. In this paper, we present the results of global optimization of the Linac options towards a robust and efficient physics design for the superconducting section of the PIP-II linac. We also investigate the impact of the nonlinear field of the dipole correctors on the beam quality and derive the requirement on the field quality using statistical analysis. Finally, we assess the need to correct the quadrupole focusing produced by Half Wave, and Single Spoke accelerating cavities. We assess the feasibility of controlling the beam coupling in the machine by changing the polarity of the field of Linac focusing solenoids
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA36
About •	Received ※ 02 August 2022 — Revised ※ 04 August 2022 — Accepted ※ 10 August 2022 — Issue date ※ 01 October 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXD6	Electron Cloud Measurements in Fermilab Booster	556
	S.A.K. Wijethunga, J.S. Eldred, E. Pozdeyev, C.-Y. Tan Fermilab, Batavia, Illinois, USA
	Fermilab Booster synchrotron requires an intensity upgrade from 4.5×10¹² to 6.5×10¹² protons per pulse as a part of Fermilab’s Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the fast transverse instabilities caused by electron cloud effects. According to the experience in the Recycler, the electron cloud gradually builds up over multiple turns in the combined function magnets and can reach final intensities orders of magnitude greater than in a pure dipole. Since the Booster synchrotron also incorporates combined function magnets, it is important to discover any existence of an electron cloud. And if it does, its effects on the PIP-II era Booster and whether mitigating techniques are required. As the first step, the presence or absence of the electron cloud was investigated using a gap technique. This paper presents experimental details and observations of the bunch-by-bunch tune shifts of beams with various bunch train structures at low and high intensities and simulation results conducted using PyECLOUD software.
	Slides WEXD6 [4.483 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEXD6
About •	Received ※ 02 August 2022 — Revised ※ 11 August 2022 — Accepted ※ 21 August 2022 — Issue date ※ 09 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THZD6	An 8 GeV Linac as the Booster Replacement in the Fermilab Power Upgrade	897
	D.V. Neuffer, S.A. Belomestnykh, M. Checchin, D.E. Johnson, S. Posen, E. Pozdeyev, V.S. Pronskikh, A. Saini, N. Solyak, V.P. Yakovlev Fermilab, Batavia, Illinois, USA
	Funding: Work supported by the Fermi National Accelerator Laboratory, managed and operated by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy. Increasing the Main Injector (MI) beam power above ~1.2 MW requires replacement of the 8-GeV Booster by a higher intensity alternative. In the Project X era, rapid-cycling synchrotron (RCS) and linac solutions were considered for this purpose. In this paper, we consider the linac version that produces 8 GeV H⁻ beam for injection into the Recycler Ring (RR) or Main Injector (MI). The linac takes ~1-GeV beam from the PIP-II Linac and accelerates it to ~2 GeV in a 650-MHz SRF linac, followed by a 8-GeV pulsed linac using 1300 MHz cryomodules. The linac components incorporate recent improvements in SRF technology. Research needed to implement the high power SRF Linac is described.
	Slides THZD6 [4.078 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-THZD6
About •	Received ※ 03 August 2022 — Revised ※ 11 August 2022 — Accepted ※ 12 August 2022 — Issue date ※ 04 October 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Optimization of Superconducting Linac for Proton Improvement Plan-II (PIP-II)

132

A. Pathak, E. Pozdeyev
Fermilab, Batavia, Illinois, USA

PIP-II is an essential upgrade of the Fermilab complex that will enable the world’s most intense high-energy beam of neutrinos for the international Deep Underground Neutrino Experiment at LBNF and support a broad physics program at Fermilab. Ultimately, the PIP-II superconducting linac will be capable of accelerating the H⁻ CW beam to 800 MeV with an average power of 1.6 MW. To operate the linac with such high power, beam losses and beam emittance growth must be tightly controlled. In this paper, we present the results of global optimization of the Linac options towards a robust and efficient physics design for the superconducting section of the PIP-II linac. We also investigate the impact of the nonlinear field of the dipole correctors on the beam quality and derive the requirement on the field quality using statistical analysis. Finally, we assess the need to correct the quadrupole focusing produced by Half Wave, and Single Spoke accelerating cavities. We assess the feasibility of controlling the beam coupling in the machine by changing the polarity of the field of Linac focusing solenoids

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA36

About •

Received ※ 02 August 2022 — Revised ※ 04 August 2022 — Accepted ※ 10 August 2022 — Issue date ※ 01 October 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXD6

Electron Cloud Measurements in Fermilab Booster

556

S.A.K. Wijethunga, J.S. Eldred, E. Pozdeyev, C.-Y. Tan
Fermilab, Batavia, Illinois, USA

Fermilab Booster synchrotron requires an intensity upgrade from 4.5×10¹² to 6.5×10¹² protons per pulse as a part of Fermilab’s Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the fast transverse instabilities caused by electron cloud effects. According to the experience in the Recycler, the electron cloud gradually builds up over multiple turns in the combined function magnets and can reach final intensities orders of magnitude greater than in a pure dipole. Since the Booster synchrotron also incorporates combined function magnets, it is important to discover any existence of an electron cloud. And if it does, its effects on the PIP-II era Booster and whether mitigating techniques are required. As the first step, the presence or absence of the electron cloud was investigated using a gap technique. This paper presents experimental details and observations of the bunch-by-bunch tune shifts of beams with various bunch train structures at low and high intensities and simulation results conducted using PyECLOUD software.

Slides WEXD6 [4.483 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEXD6

About •

Received ※ 02 August 2022 — Revised ※ 11 August 2022 — Accepted ※ 21 August 2022 — Issue date ※ 09 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THZD6

An 8 GeV Linac as the Booster Replacement in the Fermilab Power Upgrade

897

D.V. Neuffer, S.A. Belomestnykh, M. Checchin, D.E. Johnson, S. Posen, E. Pozdeyev, V.S. Pronskikh, A. Saini, N. Solyak, V.P. Yakovlev
Fermilab, Batavia, Illinois, USA

Funding: Work supported by the Fermi National Accelerator Laboratory, managed and operated by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy.
Increasing the Main Injector (MI) beam power above ~1.2 MW requires replacement of the 8-GeV Booster by a higher intensity alternative. In the Project X era, rapid-cycling synchrotron (RCS) and linac solutions were considered for this purpose. In this paper, we consider the linac version that produces 8 GeV H⁻ beam for injection into the Recycler Ring (RR) or Main Injector (MI). The linac takes ~1-GeV beam from the PIP-II Linac and accelerates it to ~2 GeV in a 650-MHz SRF linac, followed by a 8-GeV pulsed linac using 1300 MHz cryomodules. The linac components incorporate recent improvements in SRF technology. Research needed to implement the high power SRF Linac is described.

Slides THZD6 [4.078 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-THZD6

About •

Received ※ 03 August 2022 — Revised ※ 11 August 2022 — Accepted ※ 12 August 2022 — Issue date ※ 04 October 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)