|TUPA33||Magnetic Field Calculation of Superconducting Undulators for FEL Using Maxwell 3D||undulator, FEL, electron, laser||423|
Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357.
An ANL-SLAC collaboration is working on design of a planar superconducting undulator (SCU) demonstrator for a FEL. As a part of this project, a SCU magnet prototype is planned to be built and tested. A planar SCU magnet consisting of a 1.0-m-long segment is being designed. Although OPERA is a standard tool for magnetic field calculation, ANSYS Maxwell 3D can also be used for a large and complex geometry. An ANSYS calculated magnetic field was benchmarked with the measured field profile of existing SCUs. This paper presents calculations of magnetic field and field integrals of 0.5-m-long and 1.0-m-long planar SCUs with a new end correction scheme. Then, an external phase shifter is also incorporated into the model. A cross-talk between a phase shifter and SCU magnetic structures is also presented.
|DOI •||reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-TUPA33|
|About •||Received ※ 02 August 2022 — Revised ※ 03 August 2022 — Accepted ※ 05 August 2022 — Issue date ※ 25 August 2022|
|Cite •||reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)|