Author: Ji, F.
Paper Title Page
MOPA85 Design of a 185.7 MHz Superconducting RF Photoinjector Quarter-Wave Resonator for the LCLS-II-HE Low Emittance Injector 245
 
  • S.H. Kim, W. Hartung, T. Konomi, S.J. Miller, M.S. Patil, J.T. Popielarski, K. Saito, T. Xu, T. Xu
    FRIB, East Lansing, Michigan, USA
  • C. Adolphsen, L. Ge, F. Ji, J.W. Lewellen, L. Xiao
    SLAC, Menlo Park, California, USA
  • M.P. Kelly, T.B. Petersen, P. Piot
    ANL, Lemont, Illinois, USA
  • P. Piot
    Northern Illinois University, DeKalb, Illinois, USA
 
  Funding: Work supported by the U.S. Department of Energy Contract DE-AC02-76SF00515.
A 185.7 MHz superconducting quarter-wave resonator (QWR) was designed for the low emittance injector of the Linac Coherent Light Source high energy upgrade (LCLS-II-HE). The cavity was designed to minimize the risk of cathode efficiency degradation due to multipacting or field emission and to operate with a high RF electric field at the cathode for low electron-beam emittance. Cavity design features include: (1) shaping of the cavity wall to reduce the strength of the low-field coaxial multipacting barrier; (2) four ports for electropolishing and high-pressure water rinsing; and (3) a fundamental power coupler (FPC) port located away from the accelerating gap. The design is oriented toward minimizing the risk of particulate contamination and avoid harmful dipole components in the RF field. The ANL 162 MHz FPC design for PIP-II is being adapted for the gun cavity. We will present the RF design of the cavity integrated with the FPC.
 
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA85  
About • Received ※ 03 August 2022 — Revised ※ 09 August 2022 — Accepted ※ 11 August 2022 — Issue date ※ 30 August 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPA01 Beam Dynamics Optimization of a Low Emittance Photoinjector Without Buncher Cavities 615
 
  • J. Qiang
    LBNL, Berkeley, California, USA
  • F. Ji, T.O. Raubenheimer
    SLAC, Menlo Park, California, USA
 
  The photoinjector plays an important role in generating high brightness low emittance electron beam for x-ray free electron laser applications. In this paper, we report on beam dynamics optimization study of a low emittance photoinjector based on a proposed superconducting gun without including any buncher cavities. Multi-objective optimization with self-consistent beam dynamics simulations was employed to attain the optimal Pareto front.  
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA01  
About • Received ※ 02 August 2022 — Revised ※ 05 August 2022 — Accepted ※ 09 August 2022 — Issue date ※ 11 September 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPA02 Beam Dynamics Studies on a Low Emittance Injector for LCLS-II-HE 619
 
  • F. Ji, C. Adolphsen, R. Coy, L. Ge, C.E. Mayes, T.O. Raubenheimer, L. Xiao
    SLAC, Menlo Park, California, USA
  • J. Qiang
    LBNL, Berkeley, California, USA
 
  The SLAC High Energy upgrade of LCLS-II (LCLS-II-HE) will double the beam energy to 8 GeV, increasing the XFEL photon energy reach to about 13 keV. The energy reach can be extended to 20 keV if the beam emittance can be halved, which requires a higher gradient electron gun with a lower intrinsic emittance photocathode. To this end, the Low Emittance Injector (LEI) will be built that will run parallel to the existing LCLS-II Injector. The LEI design will be based on a state-of-the-art SRF gun with a 30 MV/m cathode gradient. The main goal is to produce transverse beam emittances of 0.1 mm-mrad for 100 pC bunch charges. This paper describes the beam dynamics studies on the design of the LEI including the simulations and multi-objective genetic algorithm (MOGA) optimizations. Performance with different injector layouts, cathode gradients, bunch charges and cathode mean transverse energies (MTEs) will be presented.  
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA02  
About • Received ※ 02 August 2022 — Revised ※ 11 August 2022 — Accepted ※ 12 August 2022 — Issue date ※ 17 August 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPA03 Status of the SLAC/MSU SRF Gun Development Project 623
 
  • J.W. Lewellen, C. Adolphsen, R. Coy, L. Ge, F. Ji, M.J. Murphy, L. Xiao
    SLAC, Menlo Park, California, USA
  • A. Arnold, S. Gatzmaga, P. Murcek, R. Xiang
    HZDR, Dresden, Germany
  • Y. Choi, C. Compton, X.-J. Du, D.B. Greene, W. Hartung, S.H. Kim, T. Konomi, S.J. Miller, D.G. Morris, M.S. Patil, J.T. Popielarski, L. Popielarski, K. Saito, T. Xu
    FRIB, East Lansing, Michigan, USA
  • M.P. Kelly, T.B. Petersen
    ANL, Lemont, Illinois, USA
 
  Funding: US Department of Energy.
The LCLS-II-HE project at SLAC is intended to increase the photon energy reach of the LCLS-II FEL to at least 20 keV. In addition to upgrading the undulator system, and increasing the electron beam energy to 8 GeV, the project will also construct a low-emittance injector (LEI) in a new tunnel. To achieve the LEI emittance goals, a low-MTE photocathode will be required, as will on-cathode electric fields up to 50% higher than those achievable in the current LCLS-II photoinjector. The beam source for the LEI will be based around a superconducting quarterwave cavity resonant at 185.7 MHz. A prototype gun is currently being designed and fabricated at the Facility for Rare Isotope Beams (FRIB) at Michigan State University. This paper presents the performance goals for the new gun design, an overview of the prototype development effort, current status, and future plans including fabrication of a "production" gun for the LEI.
 
poster icon Poster WEPA03 [4.510 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA03  
About • Received ※ 21 July 2022 — Revised ※ 28 July 2022 — Accepted ※ 08 August 2022 — Issue date ※ 11 August 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)