NAPAC2022 - List of Keywords (flattop)

Paper	Title	Other Keywords	Page
MOPA25	Simulated Lorentz Force Detuning Compensation with a Double Lever Tuner on a Dressed ILC/1.3 GHz Cavity at Room Temperature	cavity, controls, resonance, SRF	106
	C. Contreras-Martinez, Y.M. Pischalnikov, J.C. Yun Fermilab, Batavia, Illinois, USA
	Pulsed SRF linacs with high accelerating gradients experience large frequency shifts caused by Lorentz force detuning (LFD). A piezoelectric actuator with a resonance control algorithm can maintain the cavity frequency at the nominal level thus reducing the RF power. This study uses a double lever tuner with a piezoelectric actuator for compensation and another piezoelectric actuator to simulate the effects of the Lorentz force pulse. A double lever tuner has an advantage by increasing the stiffness of the cavity-tuner system thus reducing the effects of LFD. The tests are conducted at room temperature and with a dressed 1.3 GHz 9-cell cavity.
	Poster MOPA25 [0.931 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA25
About •	Received ※ 03 August 2022 — Revised ※ 09 August 2022 — Accepted ※ 11 August 2022 — Issue date ※ 13 August 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYD4	Design and Fabrication of a Metamaterial Wakefield Accelerating Structure	wakefield, acceleration, simulation, experiment	564
	D.C. Merenich, X. Lu Northern Illinois University, DeKalb, Illinois, USA D.S. Doran, X. Lu, J.G. Power ANL, Lemont, Illinois, USA
	Metamaterials (MTMs) are engineered materials that can show exotic electromagnetic properties such as simultaneously negative permittivity and permeability. MTMs are promising candidates for structure-based wakefield acceleration structures, which can mitigate the impact of radio frequency (RF) breakdown, thus achieving a high gradient. Previous experiments carried out at the Argonne Wakefield Accelerator (AWA) successfully demonstrated MTM structures as efficient power extraction and transfer structures (PETS) from a high-charge drive beam. Here we present the design, fabrication, and cold test of an X-band MTM accelerator structure for acceleration of the witness beam in the two-beam acceleration scheme. The MTM structure design was performed using the CST Studio Suite, with the unit cell and the complete multi-cell periodic structure both optimized for high gradient. Cold test of the fabricated structure shows good agreement with simulation results. Future work includes a beam test at AWA to study the short-pulse RF breakdown physics in the MTM structure, as an important component towards a future compact linear collider based on two-beam acceleration.
	Slides WEYD4 [2.322 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEYD4
About •	Received ※ 03 August 2022 — Revised ※ 09 August 2022 — Accepted ※ 10 August 2022 — Issue date ※ 31 August 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPA50	Initial Development of a High-Voltage Pulse Generator for a Short-Pulse Kicker	kicker, collider, high-voltage, operation	745
	J. Prager, K.E. Miller, K. Muggli, C. Schmidt, H. Yeager EHT, Seattle, Washington, USA
	Funding: This work was funded by a DOE SBIR (DE-SC0021470). The future Electron Ion Collider, to be located at Brookhaven National Laboratory (BNL), will require a new short-pulse stripline kicker for the 150 MeV energy recovery LINAC. The pulse generator must produce ±50 kV pulses with widths less than 38 ns into a 50° kicker load and with low jitter. The power system must be highly reliable and robust to potential faults. Eagle Harbor Technologies (EHT), Inc. is leveraging our previous experience developing inductive adders to produce a high-voltage pulse generator that can meet the needs of the BNL kickers. In this program, EHT designed a single inductive adder stage and demonstrated the challenging pulse characteristics including fast rise and fall times, low jitter, and flattop stability while operating at the full current (1 kA). EHT will present the development status and output waveforms.
	Poster WEPA50 [1.118 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA50
About •	Received ※ 01 August 2022 — Revised ※ 08 August 2022 — Accepted ※ 10 August 2022 — Issue date ※ 12 August 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

Simulated Lorentz Force Detuning Compensation with a Double Lever Tuner on a Dressed ILC/1.3 GHz Cavity at Room Temperature

cavity, controls, resonance, SRF

106

C. Contreras-Martinez, Y.M. Pischalnikov, J.C. Yun
Fermilab, Batavia, Illinois, USA

Pulsed SRF linacs with high accelerating gradients experience large frequency shifts caused by Lorentz force detuning (LFD). A piezoelectric actuator with a resonance control algorithm can maintain the cavity frequency at the nominal level thus reducing the RF power. This study uses a double lever tuner with a piezoelectric actuator for compensation and another piezoelectric actuator to simulate the effects of the Lorentz force pulse. A double lever tuner has an advantage by increasing the stiffness of the cavity-tuner system thus reducing the effects of LFD. The tests are conducted at room temperature and with a dressed 1.3 GHz 9-cell cavity.

Poster MOPA25 [0.931 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA25

About •

Received ※ 03 August 2022 — Revised ※ 09 August 2022 — Accepted ※ 11 August 2022 — Issue date ※ 13 August 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYD4

Design and Fabrication of a Metamaterial Wakefield Accelerating Structure

wakefield, acceleration, simulation, experiment

564

D.C. Merenich, X. Lu
Northern Illinois University, DeKalb, Illinois, USA
D.S. Doran, X. Lu, J.G. Power
ANL, Lemont, Illinois, USA

Metamaterials (MTMs) are engineered materials that can show exotic electromagnetic properties such as simultaneously negative permittivity and permeability. MTMs are promising candidates for structure-based wakefield acceleration structures, which can mitigate the impact of radio frequency (RF) breakdown, thus achieving a high gradient. Previous experiments carried out at the Argonne Wakefield Accelerator (AWA) successfully demonstrated MTM structures as efficient power extraction and transfer structures (PETS) from a high-charge drive beam. Here we present the design, fabrication, and cold test of an X-band MTM accelerator structure for acceleration of the witness beam in the two-beam acceleration scheme. The MTM structure design was performed using the CST Studio Suite, with the unit cell and the complete multi-cell periodic structure both optimized for high gradient. Cold test of the fabricated structure shows good agreement with simulation results. Future work includes a beam test at AWA to study the short-pulse RF breakdown physics in the MTM structure, as an important component towards a future compact linear collider based on two-beam acceleration.

Slides WEYD4 [2.322 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEYD4

About •

Received ※ 03 August 2022 — Revised ※ 09 August 2022 — Accepted ※ 10 August 2022 — Issue date ※ 31 August 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPA50

Initial Development of a High-Voltage Pulse Generator for a Short-Pulse Kicker

kicker, collider, high-voltage, operation

745

J. Prager, K.E. Miller, K. Muggli, C. Schmidt, H. Yeager
EHT, Seattle, Washington, USA

Funding: This work was funded by a DOE SBIR (DE-SC0021470).
The future Electron Ion Collider, to be located at Brookhaven National Laboratory (BNL), will require a new short-pulse stripline kicker for the 150 MeV energy recovery LINAC. The pulse generator must produce ±50 kV pulses with widths less than 38 ns into a 50° kicker load and with low jitter. The power system must be highly reliable and robust to potential faults. Eagle Harbor Technologies (EHT), Inc. is leveraging our previous experience developing inductive adders to produce a high-voltage pulse generator that can meet the needs of the BNL kickers. In this program, EHT designed a single inductive adder stage and demonstrated the challenging pulse characteristics including fast rise and fall times, low jitter, and flattop stability while operating at the full current (1 kA). EHT will present the development status and output waveforms.

Poster WEPA50 [1.118 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA50

About •

Received ※ 01 August 2022 — Revised ※ 08 August 2022 — Accepted ※ 10 August 2022 — Issue date ※ 12 August 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)