Author: Ahmed, S.A.
Paper Title Page
MOPA59 Prediction of Gaseous Breakdown for Plasma Cleaning of RF Cavities 174
 
  • S.A. Ahmed
    Ansys, Inc., Canonsburg, USA
 
  The quest for a high accelerating gradient in superconducting radio frequency cavity attracted scientists to adopt the plasma cleaning technology. Generating an efficient plasma inside a complex cavity structure for a desired frequency, gas types, and pressure for a given temperature is a challenge. The onset of discharge can be obtained from the well-known Paschen curve. Setting up an experiment is expensive and time-consuming, which may lead to a significant delay in the project. A high-fidelity computer simulation, modeling an arbitrary geometry and tracking the Paschen curve in a complex electromagnetic environment is therefore necessary. Ansys HFSS through its Finite Element Mesh (FEM) for the full-wave EM simulations combined with the electron impact ionization of gases enables the successful prediction of plasma breakdown for an arbitrary configuration for a wide frequency band and variety of gases. A comprehensive study will be demonstrated at the conference.
The author like to thank Robert Chao for the valuable discussions and his efforts in developing this capability in the Ansys Electronics Desktop.
 
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA59  
About • Received ※ 01 August 2022 — Revised ※ 03 August 2022 — Accepted ※ 06 August 2022 — Issue date ※ 19 August 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPA60 HFSS Enables Multipaction Analysis of High Power RF/Microwave Components 176
 
  • S.A. Ahmed
    Ansys, Inc., Canonsburg, USA
 
  The radiofrequency (RF) components in particle accelerators operated under a vacuum and driven by high RF power may be prone to electron multipaction ’ an RF triggered electron resonance phenomenon causing malfunction or complete breakdown. Therefore, exploring the design challenges of vacuum RF windows, cavities, and other devices for the electron multipaction becomes necessary. Setting up an experiment to mitigate the failure of RF devices is expensive and time-consuming, which may cause a significant delay in the project. Therefore, a high-fidelity computer simulation modeling the arbitrary geometry and tracking the particles (electrons) in a complex electromagnetic environment is desirable. Ansys HFSS through Finite Element Mesh (FEM) for the full-wave RF simulation combined with the particle-in-cell (PIC) technique for tracking particles in EM fields; enables the engineers/physicist successful prediction of system failure against the electron multipaction. This paper will demonstrate the workflow of the HFSS multipaction analysis.
The author like to thank Robert Chao for the valuable discussions and his efforts in developing this capability in the Ansys Electronics Desktop.
 
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA60  
About • Received ※ 03 August 2022 — Revised ※ 13 August 2022 — Accepted ※ 26 August 2022 — Issue date ※ 06 October 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)