Author: Contreras-Martinez, C.
Paper Title Page
MOPA23 Tests of the Extended Range SRF Cavity Tuners for the LCLS-II HE Project 100
 
  • C. Contreras-Martinez, T.T. Arkan, A.T. Cravatta, B.D. Hartsell, J.A. Kaluzny, T.N. Khabiboulline, Y.M. Pischalnikov, S. Posen, G.V. Romanov, J.C. Yun
    Fermilab, Batavia, Illinois, USA
 
  The LCLS-II HE superconducting linac will produce multi-energy beams by supporting multiple undulator lines simultaneously. This could be achieved by using the cavity SRF tuner in the off-frequency detune mode. This off-frequency operation method was tested in the verification cryomodule (vCM) and CM 1 at Fermilab at 2 K. In both cases, the tuners achieved a frequency shift of -565±80 kHz. This study will discuss cavity frequency during each step as it is being assembled in the cryomodule string and finally when it is being tested at 2 K. Tracking the cavity frequency helped enable the tuners to reach this large frequency shift. The specific procedures of tuner setting during assembly will be presented.  
poster icon Poster MOPA23 [0.654 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA23  
About • Received ※ 03 August 2022 — Revised ※ 11 August 2022 — Accepted ※ 19 August 2022 — Issue date ※ 31 August 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPA24 LCLS-II and HE Cryomodule Microphonics at CMTF at Fermilab 103
 
  • C. Contreras-Martinez, B.E. Chase, A.T. Cravatta, J.A. Einstein-Curtis, E.R. Harms, J.P. Holzbauer, J.N. Makara, S. Posen, R. Wang
    Fermilab, Batavia, Illinois, USA
  • L.R. Doolittle
    LBNL, Berkeley, California, USA
 
  Microphonics causes the cavity to detune. This study discusses the microphonics of 16 cryomodules, 14 for LCLS-II and 2 for LCLS-II HE tested at CMTF. The peak detuning, as well as the RMS detuning for each cryomodule, will be discussed. For each cryomodule, the data was taken with enough soaking time to prevent any thermalization effects which can show up in the detuning. Each data capture taken was 30 minutes or longer and sampled at 1 kHz.  
poster icon Poster MOPA24 [1.428 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA24  
About • Received ※ 03 August 2022 — Revised ※ 10 August 2022 — Accepted ※ 11 August 2022 — Issue date ※ 20 September 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPA25 Simulated Lorentz Force Detuning Compensation with a Double Lever Tuner on a Dressed ILC/1.3 GHz Cavity at Room Temperature 106
 
  • C. Contreras-Martinez, Y.M. Pischalnikov, J.C. Yun
    Fermilab, Batavia, Illinois, USA
 
  Pulsed SRF linacs with high accelerating gradients experience large frequency shifts caused by Lorentz force detuning (LFD). A piezoelectric actuator with a resonance control algorithm can maintain the cavity frequency at the nominal level thus reducing the RF power. This study uses a double lever tuner with a piezoelectric actuator for compensation and another piezoelectric actuator to simulate the effects of the Lorentz force pulse. A double lever tuner has an advantage by increasing the stiffness of the cavity-tuner system thus reducing the effects of LFD. The tests are conducted at room temperature and with a dressed 1.3 GHz 9-cell cavity.  
poster icon Poster MOPA25 [0.931 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA25  
About • Received ※ 03 August 2022 — Revised ※ 09 August 2022 — Accepted ※ 11 August 2022 — Issue date ※ 13 August 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPA27 Validation of the 650 MHz SRF Tuner on the Low and High Beta Cavities for PIP-II at 2 K 109
 
  • C. Contreras-Martinez, S.K. Chandrasekaran, S. Cheban, G.V. Eremeev, I.V. Gonin, T.N. Khabiboulline, Y.M. Pischalnikov, O.V. Prokofiev, A.I. Sukhanov, J.C. Yun
    Fermilab, Batavia, Illinois, USA
 
  The PIP-II linac will include thirty-six BG=0.61 and twenty-four BG=0.92 650 MHz 5 cell elliptical SRF cavities. Each cavity will be equipped with a tuning system consisting of a double lever slow tuner for coarse frequency tuning and a piezoelectric actuator for fine frequency tuning. The same tuner will be used for both the BG=0.61 and BG=0.92 cavities. Results of testing the cavity-tuner system for the BG=0.61 will be presented for the first time.  
poster icon Poster MOPA27 [0.782 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA27  
About • Received ※ 03 August 2022 — Revised ※ 10 August 2022 — Accepted ※ 11 August 2022 — Issue date ※ 04 October 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPA38 Accelerated Lifetime Test of the SRF Dressed Cavity/Tuner System for the LCLS II HE Project 136
 
  • Y.M. Pischalnikov, T.T. Arkan, C. Contreras-Martinez, B.D. Hartsell, J.A. Kaluzny, Y.M. Orlov, R.V. Pilipenko, J.C. Yun
    Fermilab, Batavia, Illinois, USA
  • W. Lahmadi
    Wahid Lahmadi, Williston, USA
 
  The off-frequency detune method is being considered for application in the LCLS-II-HE superconducting linac to produce multi-energy electron beams for supporting multiple undulator lines simultaneously. Design of the tuner has been changed to deliver roughly 3 times larger frequency tuning range. Working requirements for off-frequency operation (OFO) state that cavities be tuned at least twice a month. This specification requires the increase of the tuner longevity by 30 times compared with LCLS-II demands. Accelerated longevity tests of the LCLS-II HE dressed cavity with tuner were conducted at FNAL’s HTS. Detail analysis of wearing and impacts on performances of the tuner’s piezo and stepper motor actuators will be presented. Additionally, results of longevity testing of the dressed cavity bellow, when cooled down to 2 K and compressed by 2.6 mm for roughly 2000 cycles, will be presented.  
poster icon Poster MOPA38 [3.026 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA38  
About • Received ※ 29 July 2022 — Revised ※ 06 August 2022 — Accepted ※ 09 August 2022 — Issue date ※ 11 August 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)