NAPAC2022 - List of Authors (Kaluzny, J.A.)

Paper	Title	Page
MOPA23	Tests of the Extended Range SRF Cavity Tuners for the LCLS-II HE Project	100
	C. Contreras-Martinez, T.T. Arkan, A.T. Cravatta, B.D. Hartsell, J.A. Kaluzny, T.N. Khabiboulline, Y.M. Pischalnikov, S. Posen, G.V. Romanov, J.C. Yun Fermilab, Batavia, Illinois, USA
	The LCLS-II HE superconducting linac will produce multi-energy beams by supporting multiple undulator lines simultaneously. This could be achieved by using the cavity SRF tuner in the off-frequency detune mode. This off-frequency operation method was tested in the verification cryomodule (vCM) and CM 1 at Fermilab at 2 K. In both cases, the tuners achieved a frequency shift of -565±80 kHz. This study will discuss cavity frequency during each step as it is being assembled in the cryomodule string and finally when it is being tested at 2 K. Tracking the cavity frequency helped enable the tuners to reach this large frequency shift. The specific procedures of tuner setting during assembly will be presented.
	Poster MOPA23 [0.654 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA23
About •	Received ※ 03 August 2022 — Revised ※ 11 August 2022 — Accepted ※ 19 August 2022 — Issue date ※ 31 August 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPA38	Accelerated Lifetime Test of the SRF Dressed Cavity/Tuner System for the LCLS II HE Project	136
	Y.M. Pischalnikov, T.T. Arkan, C. Contreras-Martinez, B.D. Hartsell, J.A. Kaluzny, Y.M. Orlov, R.V. Pilipenko, J.C. Yun Fermilab, Batavia, Illinois, USA W. Lahmadi Wahid Lahmadi, Williston, USA
	The off-frequency detune method is being considered for application in the LCLS-II-HE superconducting linac to produce multi-energy electron beams for supporting multiple undulator lines simultaneously. Design of the tuner has been changed to deliver roughly 3 times larger frequency tuning range. Working requirements for off-frequency operation (OFO) state that cavities be tuned at least twice a month. This specification requires the increase of the tuner longevity by 30 times compared with LCLS-II demands. Accelerated longevity tests of the LCLS-II HE dressed cavity with tuner were conducted at FNAL’s HTS. Detail analysis of wearing and impacts on performances of the tuner’s piezo and stepper motor actuators will be presented. Additionally, results of longevity testing of the dressed cavity bellow, when cooled down to 2 K and compressed by 2.6 mm for roughly 2000 cycles, will be presented.
	Poster MOPA38 [3.026 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA38
About •	Received ※ 29 July 2022 — Revised ※ 06 August 2022 — Accepted ※ 09 August 2022 — Issue date ※ 11 August 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Tests of the Extended Range SRF Cavity Tuners for the LCLS-II HE Project

100

C. Contreras-Martinez, T.T. Arkan, A.T. Cravatta, B.D. Hartsell, J.A. Kaluzny, T.N. Khabiboulline, Y.M. Pischalnikov, S. Posen, G.V. Romanov, J.C. Yun
Fermilab, Batavia, Illinois, USA

The LCLS-II HE superconducting linac will produce multi-energy beams by supporting multiple undulator lines simultaneously. This could be achieved by using the cavity SRF tuner in the off-frequency detune mode. This off-frequency operation method was tested in the verification cryomodule (vCM) and CM 1 at Fermilab at 2 K. In both cases, the tuners achieved a frequency shift of -565±80 kHz. This study will discuss cavity frequency during each step as it is being assembled in the cryomodule string and finally when it is being tested at 2 K. Tracking the cavity frequency helped enable the tuners to reach this large frequency shift. The specific procedures of tuner setting during assembly will be presented.

Poster MOPA23 [0.654 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA23

About •

Received ※ 03 August 2022 — Revised ※ 11 August 2022 — Accepted ※ 19 August 2022 — Issue date ※ 31 August 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPA38

Accelerated Lifetime Test of the SRF Dressed Cavity/Tuner System for the LCLS II HE Project

136

Y.M. Pischalnikov, T.T. Arkan, C. Contreras-Martinez, B.D. Hartsell, J.A. Kaluzny, Y.M. Orlov, R.V. Pilipenko, J.C. Yun
Fermilab, Batavia, Illinois, USA
W. Lahmadi
Wahid Lahmadi, Williston, USA

The off-frequency detune method is being considered for application in the LCLS-II-HE superconducting linac to produce multi-energy electron beams for supporting multiple undulator lines simultaneously. Design of the tuner has been changed to deliver roughly 3 times larger frequency tuning range. Working requirements for off-frequency operation (OFO) state that cavities be tuned at least twice a month. This specification requires the increase of the tuner longevity by 30 times compared with LCLS-II demands. Accelerated longevity tests of the LCLS-II HE dressed cavity with tuner were conducted at FNAL’s HTS. Detail analysis of wearing and impacts on performances of the tuner’s piezo and stepper motor actuators will be presented. Additionally, results of longevity testing of the dressed cavity bellow, when cooled down to 2 K and compressed by 2.6 mm for roughly 2000 cycles, will be presented.

Poster MOPA38 [3.026 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA38

About •

Received ※ 29 July 2022 — Revised ※ 06 August 2022 — Accepted ※ 09 August 2022 — Issue date ※ 11 August 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)