NAPAC2022 - List of Keywords (shielding)

Paper	Title	Other Keywords	Page
MOPA02	Activation of the IBA Proteus One Proton Therapy Beamline Using BDSIM and FISPACT-II	proton, neutron, radiation, simulation	59
	E. Ramoisiaux, E. Gnacadja, C. Hernalsteens, N. Pauly, R. Tesse, M. Vanwelde ULB, Bruxelles, Belgium C. Hernalsteens CERN, Meyrin, Switzerland
	Cyclotron-based proton therapy systems generate large fluxes of secondary particles due to the beam interactions with the beamline elements, with the energy degrader being the dominant source. Compact systems exacerbate these challenges for concrete shielding and beamline element activation. Our implementation of the Rigorous Two-Step method uses Beam Delivery Simulation (BDSIM), a Geant4-based particle tracking code, for primary and secondary particles transport and fluence scoring, and FISPACT-II for time-dependent nuclear inventory and solving the rate equations. This approach is applied to the Ion Beam Applications (IBA) Proteus®ONE (P1) system, for which a complete model has been built, validated, and used for shielding activation simulations. We detail the first simulations of the activation on quadrupole magnets in high-fluence locations downstream of the degrader. Results show the evolution of the long-lived nuclide concentrations for short and long timescales throughout the facility lifetime for a typical operation scenario.
	Poster MOPA02 [0.553 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA02
About •	Received ※ 02 August 2022 — Revised ※ 09 August 2022 — Accepted ※ 19 August 2022 — Issue date ※ 21 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPA19	The Effect of the Main Injector Ramp on the Recycler	focusing, dipole, operation, quadrupole	90
	N. Chelidze, R. Ainsworth, K.J. Hazelwood Fermilab, Batavia, Illinois, USA
	The Recycler and Main Injector are part of the Fermilab Accelerator complex used to deliver a high power proton beam. Both machines share the same enclosure with the Recycler mounted 6 ft above the Main Injector. The Main Injector accelerates beam from 8 GeV to 120 GeV. While the majority of the Recycler has mu metal shielding, the effect of the Main Injector ramp is still significant and can affect both the tunes and the orbit. In this paper, we detail the size of these effects.
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA19
About •	Received ※ 02 August 2022 — Accepted ※ 04 August 2022 — Issue date ※ 23 August 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPA29	Second Generation Fermilab Main Injector 8 GeV Beamline Collimation Preliminary Design	collimation, vacuum, simulation, controls	116
	K.J. Hazelwood, P. Adamson, B.C. Brown, D. Capista, R.M. Donahue, B.L. Klein, N.V. Mokhov, V.S. Pronskikh, V.I. Sidorov, M.C. Vincent Fermilab, Batavia, Illinois, USA
	The current Fermilab Main Injector 8 GeV beamline transverse collimation system was installed in 2006. Since then, proton beam intensities and rates have increased significantly. With the promise of even greater beam intensities and a faster repetition rate when the PIP-II upgrade completes later this decade, the current collimation system will be insufficient. Over the past 18 months, multiple collimation designs have been investigated, some more traditional and others novel. A preliminary design review was conducted and a design chosen. Work is underway to finalize the chosen design, prototype some of its novel components and procure parts for installation Summer 2023.
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA29
About •	Received ※ 03 August 2022 — Revised ※ 08 August 2022 — Accepted ※ 15 August 2022 — Issue date ※ 25 September 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPA42	A Modular X-Ray Detector for Beamline Diagnostics at LANL	detector, DTL, diagnostics, electron	725
	P.M. Freeman, B. Odegard, R. Schmitz, D. Stuart, J. Yang UCSB, Santa Barbara, California, USA J. Bohon, M.S. Gulley, E.-C. Huang, J. Smedley LANL, Los Alamos, New Mexico, USA L. Malavasi WPI, Worcester, MA, USA
	An X-ray detector is being developed for diagnostic measurement and monitoring of the Drift Tube LINAC (DTL) at the Los Alamos Neutron Science Center (LANSCE) at Los Alamos National Lab. The detector will consist of a row of x-ray spectrometers adjacent to the DTL that will measure the spectrum of X-rays resulting from bremsstrahlung of electrons created in vacuum by the RF. Each spectrometer will monitor a specific gap between drift tubes, and will consist of an array of scintillating crystals coupled to SiPMs read out with custom-built electronics. The spectrometer is designed with one LYSO and three NaI crystals. The LYSO provides a tagged gamma source with three peaks that are used for calibration of the NaI. A prototype of the spectrometer was tested at the LANSCE DTL to validate the feasibility of measuring gamma spectra and performing self-calibration in situ. A summary of test results with the LANSCE prototype will be presented, along with a detector system design that aims to be modular and inexpensive across all modules in the DTL. Plans for future development will be presented as well.
	Poster WEPA42 [1.308 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA42
About •	Received ※ 04 August 2022 — Revised ※ 06 August 2022 — Accepted ※ 09 August 2022 — Issue date ※ 11 August 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPA02

Activation of the IBA Proteus One Proton Therapy Beamline Using BDSIM and FISPACT-II

proton, neutron, radiation, simulation

59

E. Ramoisiaux, E. Gnacadja, C. Hernalsteens, N. Pauly, R. Tesse, M. Vanwelde
ULB, Bruxelles, Belgium
C. Hernalsteens
CERN, Meyrin, Switzerland

Cyclotron-based proton therapy systems generate large fluxes of secondary particles due to the beam interactions with the beamline elements, with the energy degrader being the dominant source. Compact systems exacerbate these challenges for concrete shielding and beamline element activation. Our implementation of the Rigorous Two-Step method uses Beam Delivery Simulation (BDSIM), a Geant4-based particle tracking code, for primary and secondary particles transport and fluence scoring, and FISPACT-II for time-dependent nuclear inventory and solving the rate equations. This approach is applied to the Ion Beam Applications (IBA) Proteus®ONE (P1) system, for which a complete model has been built, validated, and used for shielding activation simulations. We detail the first simulations of the activation on quadrupole magnets in high-fluence locations downstream of the degrader. Results show the evolution of the long-lived nuclide concentrations for short and long timescales throughout the facility lifetime for a typical operation scenario.

Poster MOPA02 [0.553 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA02

About •

Received ※ 02 August 2022 — Revised ※ 09 August 2022 — Accepted ※ 19 August 2022 — Issue date ※ 21 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPA19

The Effect of the Main Injector Ramp on the Recycler

focusing, dipole, operation, quadrupole

90

N. Chelidze, R. Ainsworth, K.J. Hazelwood
Fermilab, Batavia, Illinois, USA

The Recycler and Main Injector are part of the Fermilab Accelerator complex used to deliver a high power proton beam. Both machines share the same enclosure with the Recycler mounted 6 ft above the Main Injector. The Main Injector accelerates beam from 8 GeV to 120 GeV. While the majority of the Recycler has mu metal shielding, the effect of the Main Injector ramp is still significant and can affect both the tunes and the orbit. In this paper, we detail the size of these effects.

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA19

About •

Received ※ 02 August 2022 — Accepted ※ 04 August 2022 — Issue date ※ 23 August 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPA29

Second Generation Fermilab Main Injector 8 GeV Beamline Collimation Preliminary Design

collimation, vacuum, simulation, controls

116

K.J. Hazelwood, P. Adamson, B.C. Brown, D. Capista, R.M. Donahue, B.L. Klein, N.V. Mokhov, V.S. Pronskikh, V.I. Sidorov, M.C. Vincent
Fermilab, Batavia, Illinois, USA

The current Fermilab Main Injector 8 GeV beamline transverse collimation system was installed in 2006. Since then, proton beam intensities and rates have increased significantly. With the promise of even greater beam intensities and a faster repetition rate when the PIP-II upgrade completes later this decade, the current collimation system will be insufficient. Over the past 18 months, multiple collimation designs have been investigated, some more traditional and others novel. A preliminary design review was conducted and a design chosen. Work is underway to finalize the chosen design, prototype some of its novel components and procure parts for installation Summer 2023.

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-MOPA29

About •

Received ※ 03 August 2022 — Revised ※ 08 August 2022 — Accepted ※ 15 August 2022 — Issue date ※ 25 September 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPA42

A Modular X-Ray Detector for Beamline Diagnostics at LANL

detector, DTL, diagnostics, electron

725

P.M. Freeman, B. Odegard, R. Schmitz, D. Stuart, J. Yang
UCSB, Santa Barbara, California, USA
J. Bohon, M.S. Gulley, E.-C. Huang, J. Smedley
LANL, Los Alamos, New Mexico, USA
L. Malavasi
WPI, Worcester, MA, USA

An X-ray detector is being developed for diagnostic measurement and monitoring of the Drift Tube LINAC (DTL) at the Los Alamos Neutron Science Center (LANSCE) at Los Alamos National Lab. The detector will consist of a row of x-ray spectrometers adjacent to the DTL that will measure the spectrum of X-rays resulting from bremsstrahlung of electrons created in vacuum by the RF. Each spectrometer will monitor a specific gap between drift tubes, and will consist of an array of scintillating crystals coupled to SiPMs read out with custom-built electronics. The spectrometer is designed with one LYSO and three NaI crystals. The LYSO provides a tagged gamma source with three peaks that are used for calibration of the NaI. A prototype of the spectrometer was tested at the LANSCE DTL to validate the feasibility of measuring gamma spectra and performing self-calibration in situ. A summary of test results with the LANSCE prototype will be presented, along with a detector system design that aims to be modular and inexpensive across all modules in the DTL. Plans for future development will be presented as well.

Poster WEPA42 [1.308 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-NAPAC2022-WEPA42

About •

Received ※ 04 August 2022 — Revised ※ 06 August 2022 — Accepted ※ 09 August 2022 — Issue date ※ 11 August 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)